Parcourir Faculté du Génie de la Construction par date de publication
Voici les éléments 1-15 de 15
-
VISCOUS FINGERING IN FIVE-SPOT IMMISCIBLE DISPLACEMENT
(16/07/2019)The work, presented in this paper, is a numerical study that deals with the phenomenon of viscous fingering in a five-point geometry that is considered a good model of oil fields. In order to investigate the effect of ... -
Temporal analysis of the performance of a RC storage tank considering the corrosion
(2019-07-01)The reinforced concrete (RC) water storage tanks are hydraulic structures that occupy a special place among civil engineering structures. Under the effect of hydrostatic and hydrodynamic loads, their walls undergo horizontal ... -
Structural reliability of elevated water reservoirs under wind loading
(2019-07-01)In the field of civil engineering, concrete water storage tanks are considered as hydraulic structures occupying a special place among other structures. The location of these tanks is based on hydraulic considerations ... -
Towards the numerical simulation of fluid/solid particles flow inside a pipe
(2019-07-16)The modeling of moving solid particles in fluid flow has been the focus of many studies and has succeeded to attract sufficient attention by researchers. However, commonly used modeling approaches such as discrete element ... -
VISCOUS FINGERING IN FIVE-SPOT IMMISCIBLE DISPLACEMENT
(Applications of Computer Algebra- ACA 2019 Montréal, Canada July 16-20, 2019, Ecole de Technologie Supérieure, 2019-07-16)The work, presented in this paper, is a numerical study that deals with the phenomenon of viscous fingering in a five-point geometry that is considered a good model of oil fields. In order to investigate the effect of ... -
Influence de la Poudre de Granit sur le Comportement Mécanique et Rhéologique du Béton Autoplaçant
(2019-10-22)Dans cette étude, nous montrons que l’ajout de poudre de granit (déchet de matériau de construction très finement broyé) en substitution partielle du ciment portland (nécessaire à la composition et à la formulation du ... -
Evolution des propriétés mécanique des BHP au Laitier Renforcés par un Fibrage Métallique Mixte
(2019-12-17)Les bétons de hautes performances (BHP) acquièrent des résistances mécaniques allant de 20 à 30 MPa à 24heures, ce qui permet d’augmenter la productivité et de réduire les délais de réalisation sur les chantiers. Aussi, ... -
COMPARATİVE STUDY OF THE MECHANİCAL BEHAVİOUR OF THE ABS POLYMER: İNJECTİON PRESS-3D PRİNTİNG
(2019-12-17)Plastic processing techniques depend on the nature of the polymers and on the destination of the finished products. To improve the productivity of plastics and their performance, the industrial world has given great ... -
VALURİNG BY RECYCLİNG OF POLYMERİC WASTE RECOVERED FROM ELECTRONİC AND ELECTRİCAL EQUİPMENT OUT OF ORDER
(5TH INTERNAIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL, 2019-12-17)The purpose of this study is the recovery and recycling of polymeric waste from electrical and electronics equipment out of service (WEEE) and stored in the open of environment. The high consumption of these equipments ... -
Micromechanics of Stress Transfer across the Interface fiber-matrix bonding
(2019-12-30)The study and application of composite materials are a truly interdisciplinary endeavor that has been enriched by contributions from chemistry, physics, materials science, mechanics and manufacturing engineering. ... -
Cracking Propagation in Concrete Bloc Exposed to Cryogenic Temperature
(2019-12-30)In order to investigate the cracking propagation in the concrete bloc exposed to low temperature, The ANSYS finite element code has been employed for performing a sequential, non linear, transient thermal-structural ... -
Numerical investigation of the jacketing method of the reinforced concrete column
(2019-12-30)The first intent of this study is to develop a finite element model that can predict correctly the behavior of the reinforced concrete column. As second aim is to use the finite element model to investigate and evaluate ... -
Mesoscopic Defects of Forming and Induced properties on the Impact of a Composite Glass/Polyester
(2019-12-30)Forming processes induce residual deformations on the reinforcement and sometimes lead to mesoscopic defects, which are more recurrent than macroscopic defects during the manufacture of complex structural parts. This ... -
Seismic performance of reinforced concrete frames structure based on Plastic rotation
(2019-12-30)The principal objective of this study, is the evaluation of the seismic performance of reinforced concrete frame structures, taking into account of the behavior laws, reflecting the real behavior of materials, using ... -
Influence de la Poudre de Granit sur le Comportement Mécanique et Rhéologique du Béton Autoplaçant
(23/10/2019)Dans cette étude, nous montrons que l’ajout de poudre de granit (déchet de matériau de construction très finement broyé) en substitution partielle du ciment portland (nécessaire à la composition et à la formulation du ...
